Catler FP 4010 - Manual (Page 12)

12
ASSEMBLY & OPERATION
TO ATTACH THE BLENDING LEG
Hold the blending leg with the blades down,
and align the top end of the blending leg
with the corresponding end of the motor
body and push until the blending leg clicks
and locks onto the motor body.
Always ensure blending leg is dry, and no
water left inside, before reattaching.
USING AS A STICK MIXER
Ensure the blending leg is assembled to the
motor body as detailed above.
1. Place food to be processed into
a suffi ciently large mixing bowl or
saucepan (do not use the food processor
bowl as this may damage either the stick
mixer or the bowl). The bowl should only
be
1 /
2
full or less when blending liquids
or when making a puree of fruit and/or
vegetables.
2. Insert the plug into a 230/240V power
outlet and turn the power on.
3. Turn the dial at the top of motor body,
select a speed from 1 to 15.
If selecting a higher speed, it is recommended
that you start on a slow speed and then
increase to high speed to avoid splattering
and over-processing.
NOTE
ASSEMBLY & OPERATION
BEFORE FIRST USE
Remove any packaging material and
promotional labels. Remove the blending
leg from the mixer motor body and wash
it in warm soapy water (refer to assembly
instructions in this booklet). Rinse and dry
thoroughly. Ensure no water remains inside
the blending leg to avoid water running into
the motor body when reattached.
Disassemble and wash the chopping blade,
chopper bowl, chopper bowl lid, whisk,
storage lid, and blending jug in warm soapy
water, rinse and dry thoroughly. Ensure no
water remains on the chopper bowl lid or
whisk attachment to avoid water running
into the motor body when reattached.
The detachable blending leg, chopping bowl
(without the gearbox), quad blade, variable
masher, whisk can also be washed in the
dishwasher.
The whisk gear box, processor gear box, masher
gear box and motor body are not dishwasher
safe – see the care and cleaning section of this
booklet for cleaning instructions of these parts.
NOTE
This stick mixer is a versatile appliance
that can be attached to:
•
The stainless steel blending leg – for use
as a stick mixer.
• The food processor bowl with quad
blade, variable slicing disc, reversible
shredding disc - for use as a mini food
processor.
• The variable mashing leg – for use as
mashing vegetables.
• The whisk attachment – for use as a hand
whisk.