EFCO S5600 Outside Glazed - Manual (Page 5)

EFCO CORPORATION 7/2012 PART NO. Y302 Page 5 of 26
Series 5600 Outside Glazed Installation Instructions
Section II: Mullion Anchor & Frame Assembly
Anchor at head allows for movement
(refer to shop drawings).
“T” Anchor at Intermediate Mullion
Line of critical perimeter
sealant is shown dotted.
Type, size, and location of anchor
bolts as shown on shop drawings
per structural requirements.
The erector must supply and apply bond
breaker tape across the face of the
anchor to prevent three-sided adhesion.
“F” Anchor at
Jamb Condition
Notch head/sill
members to clear
the shear block and
anchor heads.
Shear Block
[See Note page #9]
Continuous Sealant
Bottom of
Mullion
Perimeter pressure plate with filler