Using the single cup mode – Gastroback 42712 Design Coffee Advanced - Grind & Brew User Manual

Page 13

Advertising
background image

8. pour and enjoy
Ensure the carafe lid is securely locked in position. There is no need to turn or adjust the

lid before pouring. The lid automatically opens when pouring and closes when not to keep

coffee hot.

CAution

Hot steam may rise when pouring. The bottom of the carafe is hot to touch for several

minutes after brewing. Use caution and ensure not to set the carafe on a heat sensitive

surface.

using the singLe Cup moDe

first time use only

We recommend flushing the machine to remove any dust particles or residues from the

manufacturing process. Follow the instructions, ‘USING THE CARAFE MODE’, ensuring to

completely fill the water tank (Step 1), select ‘12 CUPS’ (Step 3) and the ‘PRE-GROUND’ cof-

fee setting (Step 4). However do not add any coffee to the coffee basket. Once the cycle is

complete, discard the water from the carafe and repeat the cycle again for best results. The

machine is now ready to use.

CAution

We recommend using cold, filtered water. We do not recommend the use of de-mineralized

or distilled water as this may affect the taste of brewed coffee and how the coffee machine

is designed to function.

1. fill the water tank
Press open the flip-top lid. Pour the desired amount of cold, preferably filtered water into the

tank using a jug or the provided carafe. If using the carafe, ensure the carafe lid is securely

locked in place. The LCD screen will indicate the amount of water in the tank as it is filled.

The machine will beep when full and the water level float will rise to indicate the maximum

level. Do not exceed the 12 cup maximum. Doing so may cause water spillage at the back of

the machine. Close the flip-top lid.
note: Check the water level on the LCD screen before use. We recommend always keeping

the water tank full. The water tank should be refilled with cold, preferably filtered water. Do

not fill with any other liquid.
note: Never pour water into the bean hopper or grinding chamber area. Doing so can

cause the grinder to clog. Only re-commence use when the grinding chamber and grinding

burrs are completely dry. Refer to Troubleshooting, ‘Moisture clogging grinder’.
note: Never fill the water tank once the coffee machine has started a brewing cycle. This

will affect the volume dispensed into the cup.

45

Advertising