Gastroback 41124 Elektric Citrus Juicer - Manual (Page 6)

16
TeCHniCal speCifiCaTions
Model: Art.-No. 41124 Electrical Citrus Juicer
Power supply: 220 - 240 V AC, 50 Hz
Power consumption: 80 W
Revolutions per minute: 120 rpm
Length of power cord: appr. 177 cm
Weight: appr. 2.9kg
Dimensions: appr. 170 x 210 mm (diameter x height)
Certification:
operaTion
Before first use
Remove all promotional materials and packing as well as any foreign objects, but do not remo-
ve the model label. Before first use and after a long period of storage, clean the citrus juicer
with a damp soft cloth and warm soapy water (see Care and Cleaning).
Assembling the Juicer
CauTion: Before you plug in the juicer, always ensure that the appliance is assembled cor-
rectly and, that there are no foreign objects in the filter basket or juice container.
1. Lift off the dust cover.
2. Unwrap the power cord from the cord storage under the bottom of the motor base. Place the
appliance on a sufficient surface (see Safeguards for Daily Operation).
3.
Place the juice container on the motor base. The spout settles in the cut out of the motor base.
4. Insert the filter basket in the juice container. The upper edge of the filter basket may not pro-
trude the brim of the juice container and the rotor shaft sticks out of the centre of the filter basket.
5.
Place the juice cone on the rotor shaft.
important: If food dried on the rotor shaft or in the interior of the juice cone, you may find it
difficult to mount the juice cone. Do not use any violence, but clean the surfaces of the rotor shaft
and juice cone first, before assembling the appliance (see Care and Cleaning).
CauTion:
Do not use any hard or sharp utensils or abrasive cleaners for cleaning. Handle
with care to avoid damage.
With the juice cone installed, the appliance is ready for use.
Operating the citrus juicer
important: During operation, pulp builds up in the filter basket. Do not allow the filter basket
or juice container to overfill. Otherwise, the juice will not be sufficiently separated from the pulp.
If you process a large amount of fruit, regularly interrupt juicing and unplug the appliance to let
the motor cool down and to empty the filter basket. Ensure, that the spout will not block during
operation. Do not leave any food dry on the appliance or any parts of the appliance.