JDC Electronic SA SalinoMADD - Manual (Page 6)

6
MADD Technologies sàrl
– Avenue des Sports 42 – CH-1400 Yverdon-les-Bains – Switzerland
Tel: +41 24 445 31 16 – Fax: +41 24 445 21 23 – Email: [email protected] – www.madd.ch
Main menu
Two seconds after the start (see above), the main menu ACQUISITION appears automatically. With help of the
button
, it permits the selection between the 3 functions as illustrated below. The fourth function switches
off the device. The button confirms the function selected.
•
ACQUISITION mode: This mode permits to launch a gauging
acquisition and to introduce data for a gauging site.
•
CALIBRATION mode: The calibration of the probe can be done in
this mode in order to correct eventual deviations of the salinity
measurement.
•
MULTIMETRE mode: Mode used to do continuous measurements.
It displays salinity in milligrams of salt per litre of water, the
water temperature in °C as well as the conductivity in μS. per
cm.
•
END mode: This permits to switch off the device.
Above illustrations shows that the battery power is always clearly displayed in order to prevent starting
operation with nearly empty cells