Preparations for jacking – Jeep 2008 Grand Cherokee User Manual

Page 374

Advertising
background image

CAUTION!

The winch mechanism is designed for use with the
jack extension tube only. Use of an air wrench or
other power tools is not recommended and can dam-
age the winch.

When the spare is clear, tilt the retainer at the end of the
cable and pull it through the center of the wheel.

Preparations For Jacking

Park the vehicle on a firm level surface, avoid ice or
slippery areas, set the parking brake and place the gear
selector in P (Park). Turn OFF the ignition.

WARNING!

Do not attempt to change a tire on the side of the
vehicle close to moving traffic. Pull far enough off
the road to avoid being hit when operating the jack
or changing the wheel.

• Turn on the Hazard Warning Flasher.

• Block both the front and rear

of the wheel diagonally oppo-
site of the jacking position.
For example, if changing the
right front tire, block the left
rear wheel.

• Passengers should not remain in the vehicle when the

vehicle is being jacked.

374

WHAT TO DO IN EMERGENCIES

Advertising