Jeep 2009 Grand Cherokee SRT - Quick Reference Guide - Manual (Page 10)

vehicle features
speed conTrol lever:
CRuISE ON/Off
• Press the ON/OFF button to activate the Speed Control.
• CRUISE will appear on the instrument cluster to indicate the Speed
Control is on.
• Press the ON/OFF button a second time to turn the system off.
SET
• With Speed Control on, press down and release the lever to set a
desired speed.
ACCEL/dECEL
• Press and hold the lever up to accelerate or down to decelerate the
vehicle; release the lever to save the new set speed.
• Once a speed is set, tapping the lever up or down will increase or
decrease the set speed approximately 1 mph (2 km/h).
CANCEL
• Pull the lever toward you, or apply the brakes to cancel the set speed
and maintain the set speed memory.
• Press the ON/OFF button to turn the system off and erase the set
speed memory.
RESuME
• To resume a previously selected speed in memory, press the lever up
and release.
press
on/off
Button
196629_09b_Grand_Cherokee_QRG_042409.indd 11 4/24/09 2:04:06 PM