Vetter Oil water debris aspirator - Manual (Page 6)

Page 6/15
Vetter Oil-Water-Debris Aspirator
4.3 Aspiration of dust
The filter cartridge ( Item No.: 2200 0006 00) must be inserted before
operation. Loosen the three motor clamps and withdraw the motor
head out of the adapter.
Avoid damage when depositing and storing the
motor head.
Insert the filter cartridge into the adapter. Place the motor head into the
adapter and fix it with the three motor clamps. Make certain that the
filter cartridge and the motor head are perfectly seated and sealed. The
Oil-Water-Debris Aspirator can now be used for the aspiration or neutral
dust.
If, for example, there is a decrease in suction power, clean the filter cart-
ridge or, if necessary, exchange it for a new one.
Liquids must not be aspirated if the filter
cartridge is used because this considerably
decreases the suction power and also inhibits
the correct operation of the swimmer ball.
4.4 Care and maintenance
Any special maintenance measures are not required owing to the stur-
dy construction of the Vetter aspirator. The swimmer float housing on
the motor head and the swimmer float are to be regularly checked for
dirt and foreign bodies and manually cleaned if necessary. The motor
head, swimmer float housing and the suction hoses are not, under any
circumstances, to be cleaned with a hot water high pressure cleaner,
as for example can be done with the containers. This cleaning must be
done manually with a cloth or brush. Observe the safety regulations. The
motor head with the suction turbine is maintenance-free and does not
therefore require any special maintenance.
5. Taking the product out of operation
The disposal of used electrical and electronic equipment (applicable
in the countries of the European Union and other European countries
with a separate collection system for these items) in accordance with the
electrical and electronic equipment act (ElektroG) of 24th March 2005,
implementing the EC guidelines 2002/96/EC on electrical and electronic
equipment (“WEEE guidelines“).
This symbol on the product or its packaging means that the electronic
components of this product are not to be treated as normal household
waste but must be returned to the manufacturer for recycling (free
delivery).