Lens serial connection, Vinten radamec pda connection, Vr connection – Vinten Radamec Quattro SE HPM User Manual
Page 19: Cable clamp, Switching on
Publication Part No. V3851-4981 Issue 2
17
Lens serial connection
The lens serial port (9) is not currently utilized.
Vinten Radamec PDA connection
The Vinten Radamec PDA configures, calibrates and coordinates all devices connected to the HPM.
Connect the Vinten Radamec PDA to the PDA Comms port (16) using the supplied PDA cable. For
more information please refer to the Vinten Radamec PDA Operators Guide (Publication Part No.
V4015-4980).
VR connection
The VR data port (15) provides output for the studio VR system. The RS422 pin designations are as
follows:
The data is outputted in the Vinten Radamec D1 data packet.
Cable Clamp
All cables can be fed through and secured using the cable clamp (14) to keep the system tidy and
prevent connectors/ports from being damaged if a cable becomes snagged.
Switching on
Once all connections have been made, the HPM can be switched on using the power switch (17).
Pin
HPM
Function
Pin
VR Computer
Function
2
RXD- / RXA
VR specified
TXD- / TXA
6
RXD+ / RXB
VR specified
TXD+ / TXB
3
TXD- / TXA
VR specified
RXD- / RXA
7
TXD+ / TXB
VR specified
RXD+ / RXB
CAUTION!
Ensure that connected cables do not become entangled around the
pan axis, due to the possible continuous 360° rotation of the head.