Vinten Radamec Quattro SE Pedestal - Manual (Page 5)

3
Preface
Thank you and congratulations on your new Quattro-SE
pedestal from Vinten Radamec
We want you to get the most from your new Quattro-SE pedestal, and therefore encourage you to read this
operators guide to familiarise yourself with its many features, some of which may be new to you. It also covers
essential health and safety information and a section on maintenance that will ensure you keep your new prod-
uct in perfect condition.
To receive additional benefits, register with Vinten Radamec now by completing the enclosed form.
Features and benefits of your new Quattro-SE pedestal
The Quattro-SE is an encoded version of the Quattro-SL pedestal, it provides the floor and height position for
a virtual reality rendering system. The pedestal incorporates all the features and benefits of the Quattro-SL
which has been specifically designed to meet the exacting demands of camera operators working with full fa-
cility cameras.
• Position tracking
• Unique PDA user interface for ease of set-up
• Simple synchronising for VR studio software providers
• Suitable for a wide range of payloads up to 80 kg (176.4 lb).
• Narrow base and small footprint allow you to manoeuvre into smaller areas, tight sets and stand-
ard 30-inch doorways.
• Low-friction wheels reduce the steering effort, providing a sensitive feel.
• On-shot stroke of 100 cm (39.4 in.) and a maximum height of 149 cm (58.3 in.) provides in-creased
creative angles and means that raised platforms are not needed to obtain eyeline.
• The adjustable skirt is protected by the base, reducing damage and improving reliability and al-
lowing close floor clearances for small-diameter cables.
Once again, thank you for choosing the Quattro-SE
We are confident it will give you many years of reliable performance