Symbols – Welch Allyn 300 Series Vital Signs Monitor - User Manual User Manual
Page 6

2
Chapter 1 General Information
Welch Allyn Vital Signs Monitor 300 Series
Symbols
The symbols illustrated on the following pages appear on the monitor or in this document.
Table 1. Symbols: Certification and Operation
Table 2. Symbols: Shipping, Storing, and Environment
Table 3. Symbols: Connectors
Table 4. Symbols: Printer Door
This device has been tested and certified by
the Canadian Standards Association
International to comply with applicable U.S.
and Canadian medical safety standards.
Urgent alarm notification (output to Nurse Call
system)
The CE Mark and Notified Body Registration
Number signify that the device meets all
essential requirements of the European
Medical Device Directive 93/42/EEC.
Recycle used batteries properly and in
accordance with local regulations.
Do not dispose of batteries in refuse containers.
Australian Registered Importer
Sealed lead-acid battery, 6V 4 Ah
Recycle the monitor and battery separately from other disposables. (See
“Recycling Monitor Components”
Patient connections are Type BF, and protected against defibrillation.
WARNING Indicates conditions that could lead to illness, injury, or death.
Caution In this manual, indicates conditions that could damage equipment or other property.
Caution On the product, means “Consult accompanying documentation.”
Keep this end of the package or shipping
crate up.
Protect the monitor from exposure to rain.
Fragile contents—handle with care.
Do not subject the monitor to altitudes outside
these limits.
Do not expose the monitor to relative
humidity above this limit.
Limit stacking to this number of units.
Do not expose the monitor to temperatures
outside these limits.
Temperature Probe Cable Connector
SpO2 SpO
2
Sensor Cable Connector
RS232 Cable Connector
AC Power Adapter Cable Connector
Nurse Call Cable Connector
NIBP Hose Connector
Press to open the printer door
Load paper this direction