Vermont Casting VCS501 - Manual (Page 10)

10 30005436
VCS501 Series Assembly
CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or
moving the grill is recommended.
Step 8: Attach Towel Bars, Utensil Hooks and Spit Rod Storage Brackets
Parts Required
Left Side Right Side
(1) Towel Bar (1) Towel Bar
(3) Utensil Hooks (4) #10-4 x 1/” Screws (50000337)
(4) #10-4 x 1/” Screws (50000337)
Spit Rod Storage Bracket
() Brackets (3000547)
Towel Bars and Utensil Hooks
Figure 9
Slide three (3) utensil hooks into the towel bar. (Left side only)
Attach towel bar with utensil hooks to left side condiment tray as shown using four (4)
#10-4 x 1/” screws.
Attach towel bar without utensil hooks to right side condiment tray.
Spit Rod Storage Brackets
Figure 10
The spit rod storage brackets are located on the back upper panel of the grill.
Tilt the bracket as shown, so the larger end of the bracket will fit
into the opening. Then slide the bracket down. Repeat for both
brackets.
B351
towel bars
11/10
Towel
Bar
#10-4 x
1/” Screws
(50000337
Utensil Hooks
B351
Figure 9
"
SPIT
Spit Rod Storage
Bracket
B4
Figure 10
"
SPIT
Spit Rod
Storage
Rear View
B5
Shown with optional skirt