Y-cam Classic Range - Manual (Page 39)

Page 39
6.32 Schedule Setup
The Alarm that the motion detection triggers can be setup to be active or non‐active at certain times of the week.
By default, the schedule is set to be “active” at all times “always”.
However you can set the schedule to not trigger alarms at certain times (useful for instance if you don’t want alarms to
go off while your office is open from 9am until 5.30pm). You can set up to 4 schedules, and you can use these to send
alarms to different places – such as emails or FTP.
Schedule Setup Options
[Schedule ID] Select the ID, you can save up to four schedules and use them for different purposes .
[Everyday] Activate the alarm daily on specified times. Un‐ticking this box will display the days of the week. (See
screenshot)
[Always] Always activate the alarm.
[Range] Activates the alarm on specified times
[Except] Deactivates the alarm during time specified
[Start time] Starting time for the alarm.
[End time] Ending time for the alarm.
Click “Apply” to confirm your settings once finished.