C. Crane US3R - Manual (Page 13)

Super USB WiFi Antenna 3 Page 13
WiFi Tips
For more WiFi Tips, see the C. Crane web site at:
www.ccrane.com/US3
1. Receiving an outside signal while inside a
building:
Place the Super USB WiFi Antenna oriented vertically
in the center of a window. It is best to place it in a win-
dow that is facing the WiFi source. Obstructions be-
tween the source of the WiFi signal and the antenna
will greatly reduce the effective WiFi range.
2. Receiving a better signal with the antenna
mounted outside:
For an even better signal, place the antenna outside
where it is not inhibited by walls or windows. It is best
to place the antenna as high as possible and at least
3ft away from metal objects. There is also an
optional 30ft cable available at
www.ccrane.com/SPC
which will allow you to place the antenna in a farther
location. Be sure to use the rubber grommet between
the antenna and the cable to protect the connection
from weather.
For Boat and Extended Outdoor Use:
We recom-
mend wrapping coaxial sealant (sold separately)
around the base of the antenna, covering the connec-
tion and part of the cable for more protection.
3. Receiving an inside signal from within the same
building:
If the WiFi source is located on the same floor, orient
the Super USB WiFi Antenna vertically. If the WiFi
source is located on a floor above or below, it may be
necessary to adjust the angle of the antenna to
receive in the direction of WiFi source.
4. Mounting Options:
Supplied with the antenna are mounting options for
most situations.
• For mounting on a vertical pole, use the Cable
Tie. Place it around the narrowest part of the an-
tenna, near the middle, to secure it to the pole.
• For mounting on a horizontal tree branch, clothes-
line, or other object, use the supplied Lanyard.
Loop the small section through the hole at the top
of the antenna. Loop the larger ribbon section
around, or hang it on the object. Both sections of
the Lanyard detach for easy installation and re-
moval.
• For smooth surfaces like a window or back of a
laptop screen, use the supplied Suction Cups.
Slide the suction cups onto the antenna and