Leica Geosystems Leica GeoAce User Manual
Page 28
28
GeoAce, Leica GeoAce RTK Base Station User Interface
Influence of
Average Time
Settings
Changing the Averaged time settings has influence on the accuracy of the absolute
position values.
Changing the averaging time is possible at any time. Changing these time
settings has an effect on the position value and can result in an offset to
the previously used position.
Averaging calculation is done continuously in the background, independent
of the chosen time settings. This allows switching between different settings
without position reporting delay - taking the already lapsed measurement
time period into account.
Effects when increasing the averaging time:
•
The absolute position may be more accurate.
•
A more accurate absolute positions will not affect the relative accuracy (e.g.
accuracy of ploughing lines)
Effects when decreasing the averaging time:
•
The absolute position may be less accurate.
•
A less accurate absolute position will not affect the relative accuracy (e.g. accu-
racy of ploughing lines)