Cable Electronics CELABS HSW88C - Manual (Page 4)

• State-of-the-art Silicon Image (Founder of HDMI) chipset embedded
for upmost compatibility and reliability
• HDMI 1.3c compliant
• HDCP compliant
• Allows any source to be displayed on multiple displays at the same time
• Allows any HDMI display to view any HDMI source at any time
• Supports 7.1 channel digital audio
• Supports default HDMI EDID and learns the EDID of displays
• The matrix switch master can switch every output channel to any
HDMI input by push button, IR remote control, USB port or RS-232 control
• Allows control of local HDMI sources such as DVD and TiVo ® by IR
extender through control path at remote receiver
• Allows control of main matrix switch through control line at remote
receiver
• Extends video signal up to 35m (115 feet) over CAT5e at 1080p and
likely longer with better HDMI source device (such as PS3
® ), better
grade HDMI display (such as Sony X-series HDTV ® ), and better quality
solid CAT6 cable
• Easy installation with rack-mounting and wall-mounting designs for
master and receiver respectively
• Fast response time – 2~5 seconds for channel switch
FEATURES
2. Setting button:
Press Get button to read back device ID.
Press Set button to write device ID.
3. Linkage button:
Press Linkage button to read back all status.
4. Open/Close button:
Press this button to close or open COM port.
5. Mapping button:
Select All Output:
Select “set all output”, then select the
source on main menu. You can quickly set
all outputs to the same source.
Unselect All Output:
Release output selection.
Select Input1~8-Output:
Select Input Source. Then select the
output port icon.
For example:
Select input source 1. Then select output
port one and two. The video and audio
will be send to ports one and two.
6. Fast Select button:
Press Fast select button. Quick setting.
Input one > Output Port one
Input two >Output Port two
…..
Press Fast select pull down menu.
Select Input Num-Output Num
Input source #1 > Output port #1
Input source #2 > Output port #2
…..
Select Input* - All Output
Send the same source to all outputs.
The length depends on the characteristics and quality of the
cables. Higher resolutions and longer transmission distances
require low skew cables (<25ns/100m) for best performance.
Unshielded CAT6 with metal RJ-45 connectors is recommended
TiVo is a registered trademark of TiVo Inc.
PS3 is a registered trademark of Sony Computer Entertainment.
Sony X-series HDTV is a registered trademark of Sony Electronics Inc.