California Faucets Single-Hole Bar/Kitchen Faucet - Manual

CF-6209-1_ii_101217.doc Pg 1
CF-6209-1
Single Hole Bar / Lavatory Faucet
Installation Instructions
1
IMPORTANT: Read all instructions prior to installation and provide copy of instructions to consumer.
Operating Specifications:
Recommended Supply Pressure:
20 to 70 psi *
* If water pressure exceeds 70 psi, install a Pressure-Reducing Valve (RPV).
INSTALLING FAUCET TO SINK/DECK
• Insert O-RING (2) into bottom of BASE RING (1) and
center over sink/deck THROUGH-HOLE (3)
NOTE: Recommended sink/deck THROUGH-HOLE is Ø1-d”
• Insert FLEX HOSE (6) (one at a time) and THREADED
ROD (5) though BASE RING (1) and sink/deck
THROUGH-HOLE (3)
• Place BODY (4) on top of BASE RING (1)
• From underside of sink/deck THROUGH-HOLE (3),
place MOUNTING BRACKET (7) and NUT (8) onto
THREADED ROD (5)
• Tighten NUT (8) until BODY (4) and BASE RING (1) is
secure to sink/deck
CALIFORNIA FAUCETS RECOMMENDS THAT ALL PLUMBING PRODUCTS BE INSTALLED
BY A LICENSED PROFESSIONAL
Ø 1-d”