ChemoMetec SP-100 - Manual (Page 47)

9 Appendix 2: Installation of the USB driver on other Windows operating systems.
37
9 Appendix 2: Installation of the USB driver on
other Windows operating systems.
Installation
Windows XP UK Installation of the USB driver on a PC with the Windows XP operating
system
Ensure the computer is switched on, The NucleoCounter properly
connected and the Installation CD-ROM is loaded into appropriate drive.
When the Instrument is turned on, the Windows XP operating system will
usually detect the location of the USB driver and install it automatically.
It will display the “Found New Hardware Wizard” that will guide you
through the installation of the “nucleo Device” used for the USB driver.
Select “Install the software automatically” option and make sure the
Installation CD-ROM is in your CD-ROM drive. Click “Next” and Windows XP
will locate the driver on the CD-ROM. If the Installation CD-ROM is not in
the CD-ROM drive, then insert it before clicking “Next”.
Windows XP will now search for the USB driver. This can take a minute or
so, and during the search the message below will appear: