Elektron Analog Four - Manual (Page 55)

GLOBAL MENU
47
GLOBAL MENU
The GLOBAL menu offers settings that affect Analog Keys on a global level. Global tune, MIDI and CV settings
are made here. Up to four Global slots, where each can have individual settings, are available.
Access the menu by pressing [FUNCTION] + [SONG]. Scroll the list by using [UP]/[DOWN] or the SOUND
SELECTION wheel. Open a highlighted menu by pressing [YES/SAVE].
PROJECT
Here projects are managed. This menu is covered in the section “PROJECTS” on page 14.
GLOBAL SLOT
Selects which of the four Global slots to use. Select the active slot by using the [LEFT]/[RIGHT] arrow keys.
Press [YES/SAVE] to confirm the selection. All changes made to a Global slot are automatically saved. A slot
stores the current configuration of the synth, sequencer, CV and MIDI settings . All changes made to a Global
slot are automatically saved.
SYNTH CONFIG
Analog Keys master tune and calibration settings are found here.
MASTER TUNE sets the master tune for the analog oscillators. The default setting is 440.0 Hz.
CALIBRATION will start the calibration routine for the oscillators, pulse widths and filters. After selecting this
option, a popup window asking to confirm the calibration will appear. Press [YES/SAVE] to proceed with the cali-
bration. Please note the calibration routine takes a while to complete.
• Analog Keys is factory calibrated. It should not be re-calibrated unless specifically stated by Elek-
tron Support.