Industrial Data Systems IDS DT200 - Manual (Page 12)

10
PRINTER TYPE ADD LF
TO CR
PAGE
PAUSE
LINE
LEN
END OF
PRINT
SIZE
1
SIZE
2
SIZE
3
SIZE
4
IDS 310 N N 80 0C 01 04 XX XX
STAR MICRO. DP8340 N N 80 0C 14 0E XX XX
EPSON RX80 DOP N 80 0C 14 0E XX XX
EPSON X-80 DOP N 80 0C 14 0E XX XX
OKIDATA u92 DOP N 80 0C 1E 1F XX XX
OKIDATA u92 (IBM) DOP N 80 0C 14 0E XX XX
OKIDATA 320 DOP N 80 0C 0F 0E XX XX
All values for END OF PRINT and SIZE(s) are in hexadecimal.
Definition of terms used in Custom Printer Interface Table.
DOP -- Depends on printer. This is used for the "ADD LF TO CR" configuration. Many
printers have an automatic line feed after carriage return setting. If auto cr. after lf. is
ENABLED on your printerT210.
N -- Indicates a yes or no response.
XX -- Indicates any hexadecimal value.
NOTE: Many printers use the same interfaces. If your printer is not listed above, check the users
manual for cross compatibility.