Industrial Data Systems IDS 550 - Manual (Page 7)

"BAUD = 1200"- selects 1200 baud.
"BAUD = 2400"- selects 2400 baud.
"BAUD = 4800"- selects 4800 baud.
"BAUD = 9600"- selects 9600 baud.
Press the CONTINUE key to scan the baud rate selections. Press
the ENTER key to complete the baud rate selection.
The IDS550 prompts: "N DATA N STOP"
where N DATA = number of data bits per character,
N STOP = number of stop bits per character.
The character format menu selections are:
"8 DATA 1 STOP"
"8 DATA 2 STOP"
"8 DAT PAR 1 STOP"
"8 DAT PAR 2 STOP"
"7 DATA 1 STOP"
"7 DATA 2 STOP"
"7 DAT PAR 1 STOP"
"7 DAT PAR 2 STOP"
Press the CONTINUE key to scan the character format selections.
Press the ENTER key to complete the character format selection.
If a data format was chosen that had "PAR" then the IDS550 prompts
with the parity menu:
"PARITY ODD"
"PARITY EVEN"
Press the CONTINUE key to scan the parity selections.
Press the ENTER key to complete the parity selection.