Kistler-Morse KM LD3xi Load Cell User Manual
Page 10
Chapter 1. Description
1-4
Leveling Base Adapter Plate
This kit consists of a Leveling Base Adapter Plate and four hex bolts, four flat
washers, and four lock washers. The LD360S bolts onto the leveling base
adapter plate. This plate rests on four leveling nuts and washers screwed onto
anchor bolts installed in the foundation. By turning the leveling nuts, the height
of the load discs and thus the vessel, can be adjusted for proper load distribution.
Note:
Adapter plate not shown in
illustrationat right.
This kit requires an adapter
plate for proper installation.
This unit consists of the LD3xiC/3xiMJ load cell assembly (load cell and installed
set screws) and a cage assembly. The load cell has the loading head on top and
they both slide into the cage assembly. They are held in place with three set
screws. The set screws are pre-installed into the load cell at the factory. The load
cell assembly slips down into the holes of the cage assembly. (The LD3xiC
assembly does not include jacking bolts, the LD3xiMJ does include jacking
bolts.)
LD3xiC/3xiMJ Load Cell Assembly