AltiGen MAXCS 7.0 MaxMobile User Guide for iPhone - Manual (Page 19)

MaxMobile Communicator iPhone Edition 15
Using Ma
xMob
ile
Communicator
• If an incoming call wakes the phone from sleep state, an iPhone slider
control instructs you to answer the phone by sliding an arrow to the
right. Then switch the display to the MaxMobile call screen (press the
iPhone’s Home button and then tap the MaxMobile icon).
Figure 11. Answering a call
• Call duration is displayed.
• Put a call on hold by selecting it and tapping the Hold button. The
green “Connected” bar turns to red.
• Take a call off hold by selecting it and tapping the UnHold button. The
red “Hold” bar turns back to green.
• To end a call, tap the Release button in MaxMobile.
Transferring a Call
To transfer a call you’re connected to,
1. Tap the Transfer button.
2. Dial the target number from the keypad or select from other screens.
Call is ringing. Tap whatever Answer button
is available to you. The iPhone Answer
button is shown in the first figure; the
MaxMobile Answer button is shown in the
center figure. If a call awakens your
phone from a sleep
state, you’ll see this
screen. Slide the bar to
answer the call. Then
switch to MaxMobile.