CHEVROLET 2010 Avalanche User Manual

Page 38

Advertising
background image

Black plate (4,1)

Chevrolet Avalanche Owner Manual - 2012

2-4

Keys, Doors, and Windows

K

(Unlock): Press once to unlock

only the driver door. If

K

is pressed

again within three seconds, all
remaining doors, including the
tailgate, unlock. The interior lamps
may come on and stay on for
20 seconds or until the ignition is
turned on.

If enabled through the DIC, the turn
signal lamps flash twice to indicate
unlocking has occurred. See Vehicle
Personalization (With DIC Buttons)
on page 5‑45
.
If enabled through the
DIC, the exterior lights may turn on.
See “APPROACH LIGHTING” under
Vehicle Personalization (With DIC
Buttons) on page 5‑45
.

Pressing

K

on the RKE transmitter

disarms the content theft‐deterrent
system. See Anti-theft Alarm
System on page 2‑17
.

L

(Vehicle Locator/Panic

Alarm): Press and release to
locate the vehicle. The turn signal
lamps flash and the horn sounds
three times.

Press and hold

L

for more than

two seconds to activate the panic
alarm. The turn signal lamps flash
and the horn sounds repeatedly for
30 seconds. The alarm turns off
when the ignition is moved to
ON/RUN or

L

is pressed again.

The ignition must be in LOCK/OFF
for the panic alarm to work.

Programming Transmitters to
the Vehicle

Only RKE transmitters programmed
to this vehicle will work. If a
transmitter is lost or stolen, a
replacement can be purchased and
programmed through your dealer.

When the replacement transmitter
is programmed to this vehicle, all
remaining transmitters must also be
reprogrammed. Any lost or stolen
transmitters will no longer work
once the new transmitter is
programmed. Each vehicle can
have up to eight transmitters
programmed to it. See your dealer
to program transmitters to the
vehicle.

Battery Replacement

Replace the battery if the REPLACE
BATTERY IN REMOTE KEY
message displays in the DIC. See
“REPLACE BATTERY IN REMOTE
KEY” under Key and Lock
Messages on page 5‑40
for
additional information.

Notice: When replacing the
battery, do not touch any of the
circuitry on the transmitter. Static
from your body could damage the
transmitter.

Advertising