Instructions, When the set bake time runs out, Press – Kenmore ELITE 790.7943 User Manual

Page 20: 3 )(t)( 5, Display, Eden, Setting oven controls

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

The

BAKE

(

b

^,

OVEN COOKTIME

(^) and

DELAY START

(|^ pads control the

Delay Start

feature. The

automatic timer of the

DELAY START

feature will turn the oven ON and OFF at the times you select.

Setting Oven Controls

• Setting Delay Start

Setting Delay Start

INSTRUCTIONS

To program the oven for a Delay Start and to shut off
automatically (example for baking at 375°F for 50
minutes and starting at 5:30):

1.

2

.

3.

4.

5.

6

.

Be sure that the clock is set with the correct time of day.

Arrange interior oven rack(s) and place the food in the oven.

Press (^) (See Fig. 1)

Enter the desired baking time using the number key pads by

pressing

{See Fig. 2). Note: Baking time may be

set for any amount of time from 1 minute to 11 hours and 59
minutes.

Press (See Fig. 3).

Press (S) (See Fig. 4).

7. Enter the desired start time using the number pads

CE)CA)(A)- ^2®® Fig. 5)

8. Press

. (See Fig. 6)

9. Press (^Ba^ . (See Fig. 7)

10. Press (

11. Press

(See Fig. 8}

Note: Once

Delay

Start has started, press

to display the

bake time remaining. Once the

Delay Start

has started baking, a

long beep will sound when the oven temperature reaches the set
temperature.

Press when baking has finished or at any time to cancel the

Delay Start

feature.

When the set bake time runs out;

1. "End"

will show in the display. The oven will shut off

automatically (See Fig. 9).

2. The control will beep 3 times. The control will continue to beep 3

times every 30 seconds until is pressed.

PRESS

dXD®

(Ba^

3 )(T)( 5

DISPLAY

Rg.1

_n

■JU

Fig. 2

Fig. 4

Fig. 5

!■_

TIHED DELAY

in

ÌU

BMCE

Fig. 6

in___

f u

TIMED DELAY

BAKE

Fig. 7

M

!■_

TIMED

eaAY

in

l i r °

i u J I J

BAKE

Fig, 8

EDEn

Fig. 9

NOTE: If your clock is set for normal 12 hour display mode the

Delay Start

feature can never be set to start more than 12

hours in advance. To set the

Delay Start

12-24 hours in advance see page 13 for instructions to set the control for the 24

hour time of day display mode.

20

Advertising