Casio G'zOne Ravine - Manual (Page 119)

118
SETTINGS & TOOLS
NOTES
The Location setting is set to E911 Only by default, and detection
of the phone’s current location using GPS is disabled. To enable
location detection with G’zGEAR ® , Location must be set to On.
For instructions on how to set Location to On, see page 155.
From idle mode, you can directly access the G’zGEAR ® by
pressing and holding the G’zGEAR Key .
G’zGEAR ® does not end automatically. When you do not use
G’zGEAR ® , be sure to press the End/Power Key to end G’zGEAR ® .
•
•
•
Earth Compass
In Compass mode, the direction measured with the built-in electronic
compass is displayed.
In World Nature mode, the compass and natural objects in the
direction the handset is facing are displayed on the screen.
In Customizable Compass mode, the compass and user created points
in the direction the handset is facing are displayed on the screen.
1. From idle mode, press the Center Select Key [MENU], select
Settings & Tools, then press the Center Select Key [OK]. Press
 Tools.
2. Select G’zGEAR, then press the Center Select Key [OK], 
Earth Compass.
3. The following keys are available in the Earth Compass:
Directional Key left or right: Switches the mode.
Directional Key up or down: Selects the natural object in the
direction the handset is facing to measure the distance to that
object. (Only in World Nature mode)
Directional Key up or down: Selects the user created point in
the direction the handset is facing to measure the distance to that
point. The selected point can be edited or erased by pressing
the Center Select Key [EDIT]. (Only in Customizable Compass
mode)
•
•
•