Removing text from memory, Clearing the memory – Brother EM-430 User Manual
Page 47
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advanced Typing
Holding down the
[CODE]
key and pressing the
[PRINT]
key will print the entirety
of the text stored in memot7 and may not be used to print only a portion of the file.
Printing will start at the beginning of the file and continue to the end unless stopped
in progress.
For printing from memory, you must set the left and right margins so that the distance
between them is equal to or greater than that when you originally typed the text. If
it is not, printing will stop when the right margin is reached.
Removing text from memory
STORE
The text memory may be erased by pressing
[CODE] + [CORRECT]
followed by the
[STORE]
key. This will erase the entire content of the text memory and place your
typewriter into the store mode, ready to store new text.
You must always clear the previously stored text before you begin new text. If you do not,
the text you enter will be added to the end of the previously stored text.
Clearing the memory
WORD OUT
LINE OUT
To clear the memory, hold down the
[CODE]
and
[SHIFT]
keys and press the
[WORD OUT]
key . This will clear the text memory and also reset the line format to
the default values.
Note:
Switching the typewriter off will also clear the nnemory and reset the line
format to the default values.