D.A.S. Audio Aero 40A - Manual (Page 13)

Manual del Usuario / aero 40A / User’s Manual
CHANGE OF CONFIGURATION
The unit allows to change some default factory settings. The firmware which is described here is the 1.20
version.
TM However, gain and delay only can be changed with DASnet .
By pushing ‘OK’ at the rear tag during two seconds until the arrows cover the screen, we will log in to
the menus which allow to change settings like the number of cabinets or add a high-pass filter.
For default, the unit is configurated as:
As it says: System composed of one unit, medium shoot and high-
pass filter off.
To log in to reconfiguration, keep the ‘OK’ button pushed during two
seconds until the arrows cover all the screen.
We will log in to the menus which allow to change the factory settings.
Firstly, it will appear:
And pushing the indicated arrows (right and left), you could log in to
other menus.
To log in just push the ‘OK’ button. In the first menu: ‘Configuration’, we can
choose the number of units, the throw of the unit or assign a high-pass filter
pushing the down arrow and pushing Ok to come back to the previous menu
(or with UP arrow).
As you can see, pushing down always brings you back to the first option.
This feature is the same in the rest of menus.
13