Fieldmann FDV 1001-A User Manual

Page 13

Advertising
background image

EN

CORDLESS DRILL

USER'S MANUAL

12

Mainetance and storage

When performing tasks, where the working tools may come into contact with hidden electrical

conductors, hold the electric power tool by the insulated part that is intended to be held. A work tool
that comes into contact with a "live" electrical conductor, will cause the uninsulated parts of the tool
to become live and may subsequently cause injury by electrical shock to the operator.

For repairs contact an authorised service centre or vendor who will use original spare parts. This

will ensure the correct operation of the electric power tool.

ATTENTION: Using any accessories or tools not recommended in this user's manual may
increase the risk of injury. Always use only original spare parts.

Clean the tool after the completion of every work task.
Do not use worn or damaged drill bits and drilling extension pieces. Such tools may overload the

motor and lower effectiveness.

Take proper care to prevent the motor from damage by oil or water.
Regularly check that the tool has not been damaged during the course of standard operation. Make

sure that all parts are correctly connected and do not use this product if any of its parts has been
damaged or lost.

When inserting the battery into the charger, ensure that the battery is inserted in the correct manner

and that there are no materials between the battery contacts, e.g. soils.

The battery and the charger should be protected from heat and the sun. Do not expose these

products to extreme temperatures.

Do not use the device in an outdoor environment.
Use only the charger supplied with this tool.
If the product is damaged or malfunctions, contact an authorised service centre or the vendor.

Storage

Store the tool in a dry location at a suffi cient distance from heat sources or dangerous vapours.
Do not place any other items on the machine.

Advertising