Interlogix NS2503-24P/2C User Manual - Manual (Page 76)

NS2503-24P/2C User Manual
76
The page includes the following fields:
Object Description
NO
Indicate port 1 to port 10.
PVID Set the port VLAN ID that will be assigned to untagged traffic on a given port.
This feature is useful for accommodating devices that you want to participate in
the VLAN but that don’t support tagging.
Each port allows user to set one VLAN ID, the range being 1~255, and the
default VLAN ID is 1.
The VLAN ID must be the as same as the VLAN ID of the group the port belongs
to, otherwise the untagged traffic will be dropped.
Ingress Filtering 1 Ingress filtering lets frames belonging to a specific VLAN to be forwarded if the
port belongs to that VLAN.
Enable:
Forward only packets with VID matching this port’s configured VID.
Disable: Disable Ingress filter function.
Ingress Filtering 2
Drop untagged frame.
Disable:
Accepts all Packets.
Enable: Only packet with a matching VLAN ID can be allowed to go through the
port.
Apply button Press the button to save the configuration.
GVRP VLAN
GVRP (GARP VLAN Registration Protocol or Generic VLAN Registration Protocol) is a protocol that facilitates control of
virtual local area networks (VLANs) within a larger network. GVRP conforms to the IEEE 802.1Q specification, which defines a
method of tagging frames with VLAN configuration data. This allows network devices to dynamically exchange VLAN
configuration information with other devices.