Interlogix NS3502-8P-2S User Manual - Manual (Page 424)

IFS NS3502-8P-2S User Manual
424
Example:
Enable NAS RADIUS VLAN
NS3502-8P-2S:/>security network nas radius_vlan enable
Security Network NAS Guest_VLAN
Description:
Set or show either global enabledness and parameters (use the global keyword) or per-port
enabledness of Guest VLAN
Unless the 'global' keyword is used, the <reauth_max> and <allow_if_eapol_seen> parameters will
not be unused..
Syntax:
Security Network NAS Guest_VLAN [global|<port_list>] [enable|disable] [<vid>] [<reauth_max>]
[<allow_if_eapol_seen>]
Parameters:
global: Select the global Guest VLAN setting
<port_list>: Select the per-port Guest VLAN setting
(default: Show current per-port Guest VLAN enabledness)
enable|disable: enable : Enable Guest VLAN either globally or on one or more ports
disable: Disable Guest VLAN either globally or on one or more ports
(default: Show current Guest VLAN enabledness)
<vid>: Guest VLAN ID used when entering the Guest VLAN. Use the 'global' keyword to change it
(default: Show current Guest VLAN ID)
<reauth_max>: The value can only be set if you use the 'global' keyword in the beginning of the
command. The number of times a Request Identity EAPOL frame is sent without
response before considering entering the Guest VLAN
(default: Show current Maximum Reauth Count value)
<allow_if_eapol_seen>: The value can only be set if you use the 'global' keyword in the beginning
of the command.
disable:The Guest VLAN can only be entered if no EAPOL frames have been received on a port for
the lifetime of the port
enable :The Guest VLAN can be entered even if an EAPOL frame has been received during the
lifetime of the port
(default: Show current setting)
Default Setting:
disable
Example: