Interlogix Simon XT Tabletop Installation Manual - Manual (Page 40)

Chapter 4:
34 Simon XT TableTop Control Panel Installation Manual
of inactivity if no access code has been entered yet. After an access code has
been entered to access a code-protected area of the system menu, the timeout is
four minutes.
Menu navigation
Each menu contains a list of options and/or submenus. Press the scroll up/down
buttons to navigate up and down the list of options and submenus in that menu.
Pressing Enter after navigating to an option selects that option for editing and
flashes the current value. Pressing Enter after navigating to a submenu enters
that submenu, making a new list of options accessible. Pressing Status exits a
menu and goes to the next higher level.
Programming options are arranged in a menu structure as outlined in Table 8
below. The top menu contains several features, as well as the System
programming menu. When accessing the System programming or System tests
menu, the panel prompts you to enter an access code. To continue, enter the
dealer code or installer code, then press Enter.
To program an option, first navigate to that option until it is displayed, then press
Enter. The option value will start flashing, indicating that it is ready to be
changed. Use the scroll keys or enter a numerical value to change the option,
then press the Enter key to save the change.
Table 8: Simon XT TableTop Control Panel menu structure
System time Security
Enable scheduled lights Account number
Enable sensor-activated lights Downloader code
Enable chime Phone lock
Enable special chime Autoarm
System tests Exit extension
Sensor test Secure arming
Communication test No arm on panel low battery
Initiate download call Quick exit
System programming Downloader enable
Access codes Supervisory protest
Dealer code Phone #s
Installer code Phone #1