Interlogix TruVision NVR 10 Quick Start - Manual (Page 4)

2 NVR 10 Quick Start Guide
Figure 2: Front panel controls
For detailed information on all the button functions, please refer to the user manual.
Name Description
1. Live view button Switch to live view mode.
2. Playback buttons
Reverse: In live view mode, use to play back the earliest video. In
playback mode, playback a camera in the reverse direction.
Pause: In live view, freeze the last image of the live display for all
active cameras displayed. In playback mode, stop playback.
Play: In live view mode, play all-day playback of the current camera
(upper-left video tile if in multiview mode). In playback mode, play back a
camera in the forward direction. In search mode, play back a selected video
or view a snapshot.
3. IR receiver Receiver for IR remote.
To connect the remote control to the NVR, press the Device button, enter
the device address, and press Enter.
4. Direction The DIRECTION buttons are used to navigate between different fields and
items in menus. In PTZ mode, it can control the movement of the PTZ
camera.
Enter button The ENTER button is used to confirm selection in any of the menu modes.
5. Alarm button Use to manually acknowledge an alarm.
6. USB Interfaces Universal Serial Bus (USB) ports for additional devices such as a USB
mouse, CD/DVD burner, and USB Hard Disk Drive (HDD).
7. Archive button Press once to enter quick archive mode. Press twice to start archiving.
8. Display buttons Display: In multiview mode, toggle through the various multiviews (full,
quad, 1+5, 1+7, 9, and 16).
Seq: In Live View mode, start/stop sequencing cameras on the current
monitor.
9. Menu and Search
buttons Menu: Enter/exit the main menu.
Search: In live view, enter the advanced search menu.
10. Numeric buttons Switch between different cameras in live, PTZ control or playback modes.
Enter numerals 0 to 9 when using the virtual keyboard.