Jaypro Sports BSP-30-6 - Manual (Page 4)

Page 4 of 9
Upright Panel Assembly
1. Install all brace bands and band
tensions by sliding them from
the top of the upright (see the
illustration to the right). DO
NOT STRETCH THE BANDS.
2. The orientation of the tension
band must be consistent. As one
side of the tension band is off
set for attaching the galvanized
chain link fence flush to the
pipe.
3. Insert the 113-1/2” long pipe
into the rail ends. Attach this to
the brace bands with 5/16”
carriage bolt, washer & nut
hardware.
4. Weave the 3/16” thick bar
tension into the chain link panel
and attach this to the band
tension with 5/16” hardware.
5. Repeat previous step till all the
panels is enclose with chain
link.
Step 1 & 2 & 3
S
tep 4