Jaypro Sports LG-44B - Manual (Page 2)

JAYPRO SPORTS
BOX LACROSSE GOAL WITH FLAT BACKSTAY, LG-44B
LIST OF MATERIALS
PIECE NO. PART NO. DESCRIPTION QTY.
1 N/A FLAT BACKSTAY 4
2 N/A RETAINING WASHER M10 8
3 N/A FLAT WASHER M10 8
4 N/A HEX HEAD BOLT M10 8
5 N/A MOUNTING PLATE 2
6 N/A UPRIGHT 4
7 N/A CROSSBAR 2
8 N/A SOCKET HEAD SET SCREW M10 x 16 12
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED: 5 mm & 6 mm ALLEN WRENCH (PROVIDED)
1) POSITION BACKSTAYS (1) ON A LEVEL SURFACE AND JOIN REAR OF
GOAL USING THE MOUNTING PLATE (5) AND FASTENERS AS SHOWN
IN THE ILLUSTRATION. DO NOT TIGHTEN FASTENERS.
2) SLIP UPRIGHTS (6) ONTO THE HUB OF EACH BACKSTAY THEN PLACE
THE CROSSBAR (7) INTO POSITION. THE NET TIE RAILS FACE
TOWARD THE REAR OF THE GOAL.
3) SQUARE THE GOAL, CHECK FOR 48” INSIDE DIMENSION FOR THE
GOAL FACE. THEN, FULLY TIGHTEN ALL HARDWARE.
4) CHECK HARDWARE BEFORE EACH USE TO ENSURE FASTENERS ARE
FULLY TIGHTENED.