Leapers 2.6 ITA Red/Green CQB Micro Dot with Integral QD Mount (SCP-DS3026W) User Manual
Page 14
Advertising
12
Fig 6
Fig 5
C. Install Battery:
1.
Place the mounting deck onto
the rail.
2.
Adjust the mounting deck position
until you are satisified with the view.
3.
Tighten each locking nut with a
screwdriver or coin as shown in Fig. 4.
B2. Install the Dot Sight onto the Rifle:
( for Dot Sights with Locking Nuts )
Fig 4
1.
The battery is housed inside the
Red/Green Illumination Rheostat.
Fig.5 and Fig.6 show where
the battery compartment is on 2
representative configurations.
2.
Firmly hold the housing of the
Rheostat with 2 fingers.
3.
Use your other hand to open
the battery compartment by
unscrewing the top cap.
Advertising
This manual is related to the following products: