Longshine D945GSEJT - Manual (Page 34)

Intel Desktop Board D945GSEJT Product Guide
34
Installing a Wireless LAN Card in the PCI
Express Full-Mini Card Slot
A wireless LAN card can be installed in the Desktop Board’s PCI Express Full-Mini Card
slot.
To install a wireless LAN card on the Desktop Board, see Figure 9 and follow these
steps:
1. Observe the precautions in "Before You Begin" on page 27.
2. Locate the PCI Express Full-Mini Card slot (Figure 1, W).
3. Insert the wireless LAN card into the PCI Express Mini Card connector (Figure 9, A)
at a slightly upward angle.
4. Align the mounting holes (Figure 9, B) and snap the card in place.
5. Attach your system’s antenna wires to the connectors (Figure 9, C) on the wireless
LAN card as shown.
NOTE
External antennas can be connected through the I/O shield by removing any or all of
the cut-outs above the back panel I/O section.
Figure 9. Installing a Wireless LAN Card