Luma Comfort MF18W - Manual (Page 8)

8
www.LumaComfort.com
O
PERATING
I
NSTRUCTIONS
The Luma Comfort MF18W misting fan provides cooling through the natural
power of evaporation. This misting fan has a special high pressure pump that
generates water pressure while the nozzles reduce this pressure to tiny
droplets. This creates a fine mist that evaporates upon contact w ith the air
and sunlight, resulting in a cooling effect of as much as 20-30°F.
Keep in mind that the effectiveness of this misting fan improves as the
temperature rises, but in areas with high humidity levels, you may want to use
the fan with the misting function turned off for the best results.
1. Make sure the misting fan is not connected to a water supply until the fan
has been turned on.
2. Place the misting fan on a flat, level surface. Plug the power supply into a
nearbygrounded outlet.
3. Connect the misting fan’s water hose to a compatible threaded tap,
spigot, or garden hose. You may need to attach one or both of the
provided hose adapters to the hose before connecting the unit to a water
supply.
4. Press the red button to power on the unit, and continue pressing it to
select your desired fan speed.
5. Turn on the water supply.
6. To adjust the airflow, tilt the fan
head to your desired angle. The fan
head can be adjusted up or down.
7. Do not turn off the misting fan until
you have turned off the water
supply first. Failure to do wo will result in water leaking form the front of
the fan.
8. The Luma Comfort MF18W will use approximately 9 gallons of water for
each hour of operation. The spray angle and water droplet size is
determined by the water pressure at your location.