Vertical Communications DXP Plus - Manual (Page 18)

• To answer a call at the extension receiving held call,
1. Lift handset and listen for intercom dial tone.
2. Dial # 90.
• To park a call,
1. Press INTERCOM (if on an outside call), or press HOLD,
then INTERCOM (if on an inside call).
2. Dial ✳, then dial park orbit access code (91–99 for orbit 1–9).
If chosen orbit is busy, dial alternative orbit number.
3. Hang up handset.
4. Remember the code for later use or make it known to those
who need to know it in order to retrieve the call.
NOTE: If call is not retrieved within a programmable time limit, it
reverts to the parking station as a standard held call, and only
one call can be placed in an orbit at a time.
• To retrieve a parked call,
1. Lift handset and listen for intercom dial tone.
2. Dial #.
3. Dial park orbit access code (91–99 for orbit 1–9).
4. Answer call.
Placing Calls On Hold GCA70–251
4 – 2 Single Line Telephone Station User's Guide