Crisp Solutions 616 - Manual (Page 58)

UCommand-616 Universal Remote Control User’s Manual
50 Making LCD adjustments
Adjusting the LCD backlight
From the Other menu, scroll to Backlight and press enter. You see the
following screen:
Back-Light
- - Switch - -
- - Level - - -
- - Period - -
ON
Max : 99
Set : 52
Min : 00
+
_
< <
05
sec
Press to
enable or disable
the backlight
Press to increase
the duration that the
backlight stays on
Press to decrease
the duration that the
backlight stays on
Indicates the current
backlight sensitivity
level.
Press to increase
the backlight sensitivity
level (On when darker)
Press to decrease
the backlight sensitivity
level (On when brighter)
Figure 4-23: Adjusting the backlight
Back-Light Sensor : The backlight sensor detects the ambient light
level, and activates according to the settings on this screen. Press the
ON/OFF button to enable the auto backlight (ON) or disable (OFF).
Level : Press and hold the Hardware Access Power button to auto-
matically adjust the sensitivity level of the LCD panel to the current
ambient light. Alternately press the + and – buttons on the screen to
manually set the backlight sensitivity.
•
Under the Level heading, press + to increase the sensitivity
of the backlight to the ambient lighting. A high number in-
dicates that a greater decrease of the brightness in the
ambient lighting will automatically switch the backlight
on.
•
Under the Level heading, press – to decrease the sensitivity
of the backlight to the ambient lighting. A low number in-
dicates that a slight decrease of the brightness in the
ambient lighting will automatically switch the backlight
on.