Compaq HB1004 User Manual
Page 15
Advertising
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-5
Compaq HB1004 10Base-T Hub User Guide
Writer: Weldon W. Rowan Project: Installation Comments:
File Name:SAB_2.DOC Last Saved On:7/2/98 8:49 AM
O
I
Figure 2-4 Connecting the Power Cord
3.
Check the LED marked PWR on the front panel to see if it is on. The
unit will automatically select the setting that matches the connected
input voltage. Therefore, no additional adjustments are necessary when
connecting it to any input voltage within the specified range. See
Appendix A for power requirements.
4.
The hub performs a self-diagnostic test upon power-on.
Advertising