PRG V276 Installation & Operation Manual - Manual (Page 17)

V276 ON MAC INSTALLATION & OPERATION MANUAL 7
INSTALLATION
Unpack and Setup Procedure
Step 1. Remove all components from shipping box (Figure 5).
Figure 5: Unpacking the V276 On Mac Contents
Step 2. Remove dust cover from console.
Step 3. Place console on a sturdy table or other flat surface (Figure 6).
CAUTION: Power supply plug and/or power switch/circuit breaker shall remain readily operable.
Shipping Box
USB Cable
AC Line Power Cord
Dust Cover
V276 On Mac Console
Foam Insert
Desk Lamp (x2)
USB Thumb Drive
Installation/
Operation Manual