Clarity C4210 - Manual (Page 33)

33
If the Caller ID list is empty, the display will show
- NO CALLS -.
• At anytime, the user can press FLASH button
one time to go back to standby mode.
Or
• It will go back to standby automatically at
30 seconds time out if there is no action.
Saving CALLER ID Information to
Phonebook
1. While reviewing Caller information, press
PROG key once.
2. The display shows SAVE TO PHONEBOOK.
Then it changes to ENTER TO END, and the
Caller number on the third line with the blink-
ing cursor at the end of the number.
3. Use numeric key to add extra numbers. Press
DEL/CH to erase any mistakes.
Or
Press DEL/CH to move cursor back one digit.
Then press any other numeric key to replace
the number.
4. Press ENTER to confirm the number.
5. The display shows ENTER NAME first and
then the Caller’s name on the second line
with blinking cursor at the end. The entered
number is displayed on the third line.
6. Press 2-9 keys to add extra characters. Press
DEL/CH to erase any mistakes.
Or
Press DEL/CH to move cursor back one char-
acter. Then press any other numeric key to
replace the character.
7. Press ENTER to confirm the name.
8. The display will show NUMBER STORED
first. Then it shows the name and number
just saved.
TELEPHONE OPERATIONS