StarTech.com PCM815SHNA - Manual (Page 14)

Once you exit serial command mode, you have to hit [Enter] twice again to restart
the serial command mode.
ON – Power ON
Power on one/all AC outlet port(s) immediately
Examples:
ON 1 4 – Power on port 4 on bank 1 immediately
ON 1 0 – Power on all ports on bank 1 immediately
ON 0 0 – Power on all ports on all cascaded banks immediately
OF – Power OFF
Examples:
OF 1 4 – Power off bank 1 port 4 immediately
OF 1 0 – Power off bank 1 all ports immediately
OF 0 0 – Power off all ports on all cascaded banks immediately
TA – Timer Activate at specific time point
Examples:
TA 1 4 ON 01:22:50 – Set timer to power on port 4 on bank 1 exactly at 01:22:50.
TA 1 0 ON 00:10:00 – Set timer to power on all ports on bank 1 exactly at 00:10:00
TA 0 0 OF 01:00:00 – Set timer to power off all ports on all cascaded banks at 01:00:00
(The system time should be calibrated before using this command for the first time.)
TF – Timer Activate after specific time duration
Examples:
TF 1 4 ON 03:25:56 – Set timer to power on port 4 on bank 1 exactly after 3 hour 25
minutes and 56 seconds.
TF 1 0 ON 00:10:00 – Set timer to power on all ports on bank 1 exactly after 10 minutes
TF 0 0 OF 01:00:00 – Set timer to power off all ports on all cascaded banks after 1 hour.
ED – Timer Activate every day at a specific time
Examples:
ED 1 4 ON 02:12:20 – Set timer to power on port 4 on bank 1 exactly every day at
02:12:20.
ED 1 0 ON 00:10:00 – Set timer to power on all ports on bank 1 exactly every day at
00:10:00.
ED 0 0 OF 01:00:00 – Set timer to power off all ports on all cascaded banks every day at
01:00:00.
Notes:
Instruction Manual
11