Installation – StarTech.com TB2USB3GE User Manual
Page 5
Advertising
Instruction Manual
2
Installation
1. Connect the attached Thunderbolt cable to your host computer.
2. The operating system should detect the device and automatically install it using
native drivers.
Note: On Windows systems, you may see the following message requesting permission
for the device to connect. Please click on the message, and on the following prompt,
select Always Connect from the drop-down to enable the device.
3. Once installation is complete, connect your Ethernet cable and / or USB device to
the adapter.
Note: If connecting a USB hub to the adapter, it must be a powered hub.
Advertising