Traxxas 6509 TQi 2.4GHz - Manual (Page 11)

TQ i RADIO SYSTEM • 11
Real-Time Telemetry
With the installed telemetry sensors,
the Traxxas Link dashboard comes
to life showing you speed, battery
voltage, RPM, and temperature.
Set threshold warnings and log
maximums, minimums, or averages.
Use the recording function to
document your dashboard view,
with sound, so that you can keep
your eyes on your driving and not
miss a single apex.
Manage up to 30 Models with Traxxas Link
The TQi radio system automatically keeps track of what vehicles it has bound
to and what settings were used for each–up to 30 models total! Traxxas Link
provides a visual interface to name the models, customize their settings,
attach profiles, and lock them into memory. Simply choose a model and any
previously bound transmitter, power them up, and start having fun.
Mobile Device Installation
The TQi
™ Docking Base has a unique clamping mechanism that allows
the Apple ® iPhone ® and iPod touch ® to be easily installed and removed.
The clamp’s self-adjusting design allows it to accommodate the wide
variety of protective cases available for Apple products. Follow these
steps to install your mobile device:
1. Swing the Docking Base Clamp
lever from position A (locked) to
position B (unlocked).
2. Install your mobile device by
sliding it onto the connector.
3. Ensure your mobile device is
parallel with the Docking Base.
Slide the included foam pads
beneath the mobile device so it
is held parallel with the docking
base when supported by the pads.
The pads have thicknesses of 1,
2, 3 and 4mm, choose the best
combination for your device and
case, if used. See the chart below to
find the correct pad combination
for iPhone and iPod touch models
without accessory cases.
4. Make certain your mobile device slides directly onto the connector
when slid over the foam pads. When you are satisfied with the fit, peel
the backing from the foam pads and apply them to the Docking Base.
5. Close the Docking Base Clamp by moving it to position A. Confirm
your mobile device is snug and securely held in place.
Optional: The Docking Base Clamp’s ‘fingers’ have soft gripper pads on
them to hold un-cased devices. If your device is in a soft rubber case, the
gripper pads may be removed for easier device installation and removal.
The customizable Traxxas Link
dashboard delivers real-time rpm,
speed, temperature, and voltage data.
ADVANCED TUNING GUIDE
A B
1
2
Foam pad combination recommendations (without accessory cases):
iPod touch 2nd & 3rd Generation
4mm + 3mm (7mm total)
iPod touch 4th Generation 4mm + 3mm + 2mm (9mm total)
iPhone 3GS 3mm + 2mm (5mm total)
or 4mm + 1mm (5mm total)
iPhone 4 4mm + 3mm + 1mm (8mm total)
3