Veracity CAMSWITCH 8 PLUS - Manual (Page 2)

WALL MOUNT CLIPS
• To mount the unit securely to a flat surface, fit the enclosed clips as shown and refer to the mounting template below.
1U RACK BRACKET (Option)
• Use with rack PSU options
DIMENSIONS | MOUNTING HOLE TEMPLATE
• Width 110mm (131mm inc. clips) | Depth 70mm (80mm inc. connectors) | Height 40mm | Weight 225g
Scale 1:1
DIN RAIL CLIP (Option)
• Remove upper two screws and fit as shown.
57V
POE POWER AVAILABILITY
• CAMSWITCH 8 Plus can deliver up to full 802.3at POE Plus
power on all 8 ports when used with the rack PSU system.
For other installations, the total budget is limited by the power
supply connected.
• The power budget is the total power used by POE devices.
This information may be found in the IP camera or POE device
datasheets. POE power classes are ignored.
• For example, the VPSU-57V-1500 provides a 78W budget.
This is enough for two full-power 802.3at (25.5 watt) cameras
plus two full power 802.3af (13 watt) cameras, or eight
cameras of up to 9 watts each.
INPUT SOURCE BUDGET
DC front
VPSU - 57V - 800 40 watts
VPSU - 57V - 1500 78 watts
DC rear Veracity rack PSU 204 watts
POE
POE switch 10 watts
VOR - OSP 25 watts
1. Insert 2. Click
• To check the power budget for your supply, refer to the table
below. Only Veracity 57V power supplies may be connected
to DC inputs.
122mm
25mm
8 5