Vexilar Flasher Family 2013 - Manual (Page 15)

15
ADDITIONAL FEATURES
Low Power Mode
( Not Available on FL-8SE )
Low Power Mode, or LP Mode, reduces the output power of your flasher. It is useful for
situations where the gain cannot be turned down enough in Normal Mode. Use the Low
Power Mode only when you need to. Usually, you’ll use it in only very shallow or very
weedy conditions.
FL-18
Activate the Low Power Mode (LP) by switching the Mode control to the left.
The range can be set at any position. If you switch to the left of LP, you can
activate the AZ or BL Modes in Low Power Mode.
FL-12 and FL-20
Activate the Low Power Mode by switching
the range control from OFF to the left. The
range will be set to 20 feet. You can use
any of the Mode settings in Low Power
Mode.
FLX-28
Activate the Low Power Mode by switching
the mode control to the LP setting. Note
that Auto Range and Digital Depth will not
function in LP Mode.
DID YOU KNOW ? Low Power Mode will not affect how much battery power is required
to run the flasher. Switching to Low Power Mode will actually shorten your running time
by 10%.
DID YOU KNOW ? You can have a Low Power Mode feature on an FL-8se too by
purchasing a Vexilar S-Cable. Learn more about it on page 55.