Vexilar LC-8 - Manual (Page 8)

8
ZOOM
ZOOM displays only the bottom half of the water depth. This
doubles the display resolution making it much easier to see targets
near or on the bottom. Pressing the ZOOM button once puts the LC-
8 in ZOOM mode. Pressing it again will go back to the normal view.
SWEEP
SWEEP controls how fast the information moves across the dis-
play. There are 4 steps of sweep speed. The sweep speed should
roughly match the boat speed to get the most accurate reading.
FREEZE/RESUME
The FREEZE button stops the display so that you can examine it
before it moves off of the screen. Pressing it again will RESUME the
display back to the original speed.
MENU
Pressing the MENU button opens the first menu page. Pressing it
again will go to menu page two, and pressing it again will go to page
three. Pressing the MENU button when you are on page three, the last
menu page, will send you back to page one. On each page you will
see a list of Submenus. Each item will be explained in the next section.
To resume to normal operation press the RESUME button.
ON/OFF
Simply turns the LC-8 ON and OFF. When you turn the LC-8 off
all of your menu and control settings will be saved in memory so that
when you turn it on again the unit will operate the same way as it did
when you last turned it off.
MENU SETTINGS
When you are in the MENU mode, the control panel buttons act
as input keys. You no longer read the descriptions, in white. Instead,