Viconics VWG-50 (Classic ZigBee) Engineering Guide Specifications - Manual

Viconics VWG-50 Wireless Gateway Guide Specification
Part 1 – General
1.01 System Description – The VWG-50 when utilized in conjunction with the Viconics VT7000xxxxxW
series and VZ7000xxxxxW wireless communicating controllers shall offer the integrator simple BACnet IP
or BACnet MS/TP objects to integrate over standard building automation systems using familiar
integration toolsets. The Viconics communicating controllers and gateway with wireless field bus allows
the centralization of stand-alone equipment without the need to pass communication wiring.
1.02 Quality Assurance – The wireless gateway must have the following industry approvals and
specifications:
Specifications
Platform
• PowerPC 405EP 250 MHz processor
• 64MB SDRAM & 64 MB Serial Flash
• 128 KB Static RAM
• Battery Backup - 5 minutes typical - shutdown
begins within 10 seconds
• Real-time clock - 3 months backup max via
battery
Operating System
• QNX RTOS
• IBM J9 JVM Java Virtual Machine
• NiagaraAX
Wired Communications
• 2 Ethernet Ports – 10/100 Mbps (RJ-45
Connectors)
• 1 RS 232 Port (9 pin D-shell connector)
• 1 RS 485 non-isolated port (3 Screw
Connector on base board)
Wireless Communications
• Direct spread spectrum 2.4 GHz ISM bands
• Transmission power is under 1 mW at –0.4
dBm for channels 11 to 25 and –4.0 dBm for
channel 26
Power Supply
• VWG-PS-AC 120 VAC to 15 VDC power
supply for VWG with cord
Chassis
• Construction: Plastic, din rail or screw mount
chassis, plastic cover
• Cooling: Internal air convection
• Dimensions: 6.313” (16.04 cm) W x
4.820”(12.24 cm) H (including connectors) x
2.438” (6.19 cm) D
Environment
• Operating temperature range: 0° to 50°C (32°F
to 122°F)
• Storage Temperature range: 0° to 60°C (32°F
to 140°F)
• Relative humidity range: 5% to 95%, non-
condensing
Agency Listings
• UL 916, C-UL listed to Canadian Standards
Association
• (CSA) C22.2 No. 205-M1983 “Signal
Equipment”
• FCC Part 15 Subpart C
• C-tick (Australia)